Home » G10 Epoxy Fiberglass Laminate Sheet

G10 Epoxy Fiberglass Laminate Sheet

Specification Overview
Name G10 Epoxy Fiberglass Laminate Sheet
Base Material Epoxy resin + Fiber glass
Color Green\yellow\red\black\white,etc     (Color can be customized according to customer requirements)
Thickness 0.1mm – 300mm       ( More than 300mm can be produced according to product requirements)
Dimensions Regular size are 1020x1220mm,1020x2040mm,1220x2440mm;     Special size, we can produce and cut according to customer’s requirements.
Density 1.97g/cm3 – 2.2 g/cm3
OEM Accepted
Contact Us

Product Introduction

G10 Epoxy Fiberglass Laminate Sheet is a kind of laminated sheet formed through heat pressing after the electric industry fiberglass cloth dips into epoxy resin.Suitable as the mechanical, electric and electronic insulation structural components which are used under homoeothermy and middle temperatures with a certain mechanical performance and electric performance.

This product is made of glass fiber cloth for electronics impregnated with brominated epoxy resin and heated and pressurized. It has high mechanical properties, dielectric properties and flame retardant properties, good heat resistance and moisture resistance, and good machinability;It fully meets the requirements of EU RHOS standards and SGS standards, and is widely exported to Southeast Asia, the EU, India and other regions.

It is widely used in products which requiring high-performance electronic insulation, such as FPC reinforcement boards, PCB drilling pads, glass fiber mesons, potentiometer carbon film printed glass fiber boards, precision star gears (wafer grinding), precision test plates, Electrical (electrical) equipment insulation stay spacers, insulation backing plates, transformer insulation plates, motor insulation parts, grinding gears, electronic switch insulation plates, etc.

Product Photograph

Product Photograph (1)
Product Photograph (2)
Product Photograph (3)
Product Photograph (3)
Product Photograph (3)
Product Photograph (3)

Main Specifications

Indicator Name Unit Indicator Value
Density g/ cm³ 1 . 8 – 2 . 0
Water Absorption % ≤ 0 . 5
Vertical layer bending strength MPa ≥ 340
Vertical layer compression strength MPa ≥ 350
Parallel layer impact strength (simple beam method notch) K J/ m² ≥ 37
Parallel layer shear strength MPa ≥ 34
Tensile Strength MPa ≥ 300
Vertical layer direction electric strength (90 ℃± 2 ℃ in oil) 1mm KV/ mm ≥ 14 . 2
2mm ≥ 11 . 8
3mm ≥ 10 . 2
Parallel layer direction breakdown voltage (90 ℃± 2 ℃ in oil) KV ≥ 40
Dielectric loss factor (50 Hz) ≤ 0 . 04
Insulation resistance Normality ≥ 5 . 0 × 101 2
After immersed in water for 24 h ≥ 5 . 0 × 101 0
Flammability (UL-94) Level

FAQ

Q1:  Samples
We can send you free sample,but you need to pay for the shipping charge.

Q2: How about the quality of mass production ?
Our warehouse staff will keep another sample the same as you received.the production process will be under your requirement.please rest assured about the quality.

Q3: Delivery time
It depends on order quantity.Generally speaking, the delivery time will be within 7 to 15 days.

Q4: Package
We will use professional craft paper to package on plywood pallet.if you have special package requirements, we will pack as your need.

Q5: Payment
We accept T/T,L/C,Western Union,Paypal , etc.

Inquiry

Thank you for your message. It has been sent.
There was an error trying to send your message. Please try again later.