Non-Flow prepreg’s flowing glue when pressing

2017-02-19T07:49:02+00:00December 8, 2016|

When Non-flow prepreg is applied to the rigid-flex joint plate and the cold plate, neither the cold plate window region nor the junction of the rigid-flex joint plate is intended to flow excessively. But it is necessary for the basic [...]

Non Flow Prepreg’s pressing method

2018-01-02T10:56:02+00:00December 6, 2016|

From the R & D principle, the Non-Flow prepreg is epoxy system modified, by adding a low-flow polymer in the formula, through B-order chemical reaction to reduce the fluidity of the product itself. The early as rigid-flex board and step [...]

Features Brief of Non-Flow Prepreg

2018-01-02T10:56:19+00:00December 4, 2016|

"No-flow" is the largest characteristic of the Non-Flow prepreg. This kind of plate has strict requirements to the flow ability of Non-Flow prepreg, to prevent flowing glue in the rigid-flex joint, the step slot, etc..From the melt viscosity curve of [...]

Discussion on the features of No-Flow prepreg

2018-01-02T10:56:36+00:00December 2, 2016|

In recent years, with the electronic products’fast developments to small, high-performance and multi-functionalization, multi-layer rigid-flex board, step board, cooling plate’s processing technology is rising. In order to prevent flowing glue in the rigid-flex joint、the step slot,etc., pure prepreg often be [...]

Go to Top