Vertical layer orientation Bending strength A: Normal state: E-1/150,150±5℃≥340Mpa Parallel layer orientation the impact strength (simple beam method): ≥230KJ/m Insulation resistance after immersion(D-24/23): ≥5.0×108Ω Vertical layer orientation Electrical strength( In 90±2℃ transformer oil, board thickness:1mm ): ≥14.2MV/m Parallel layer orientation Breakdown voltage: ≥40KV Relative permittivity (50Hz):≤5.5 Relative permittivity (1MHz):≤5.5 Dielectric… Continue Reading FR-4 Performance characteristics

This type products were produced by the company has three substrate colors, namely, white, black and natural color. Mainly used in computers、LED industry、watches、general household electrical appliances and ordinary electronic products (such as VCD, DVD, toys, games, etc). Its main characteristics are better punching performance, suitable for large quantities of PCB… Continue Reading CEM-3 series CCL

FR4 CCL is the abbreviation of glass fiber epoxy CCL. FR-4 CCL is divided into the following grades FR-4 A1 grade CCL This grade CCL is mainly used for military、communications、computers、digital circuits、industrial instrumentation、automotive electronics and other electronic products. This grade CCL has widely application, the technical performance indicators all meet the… Continue Reading FR-4 grade distinguish

FR4’s formal writing model is FR-4. FR-4 Epoxy Glass Cloth Laminated Sheet, according to the different application, the industry generally known as FR-4 Epoxy Glass Cloth、Insulation Board、Epoxy Board、Epoxy Resin board、Brominated epoxy resin board、FR-4、Fiberglass board、Glass fiber board、FR-4 reinforced board、FPC reinforced board、Flexible board reinforced board、FR-4 epoxy resin board、Flame – retardant insulation board、FR-4… Continue Reading Product Introduction Of FR-4

“G” stands for glass fiber, “10” should means containing 10% in glass fiber. G10 materials has characteristics of insulation, corrosion-resistant, wear-resistant. It can be used as a knife handle. G10 is a kind of composite material with glass fiber cloth and epoxy resin laminated, was developed as the aircraft material… Continue Reading A kind of composite materials with glass fiber and resin laminated

When Non-flow prepreg is applied to the rigid-flex joint plate and the cold plate, neither the cold plate window region nor the junction of the rigid-flex joint plate is intended to flow excessively. But it is necessary for the basic flow-fill line when pressing. From the rheological point of view,… Continue Reading Non-Flow prepreg’s flowing glue when pressing